Programmeur Données Reprogrammation Batterie iPhone 11-11 Pro Max | Etech-Parts
zoom_out_map
chevron_left chevron_right

Battery Data Reprogramming Programmer for iPhone 11-11 Pro Max (QIANLI)

Please note that it must be used with a QIANLI Connection Flex Cable , in fact the QIANLI Connection Flex Cable will be installed in the phone with the battery.

The following conditions are required for the solution to work

1. The old battery must be Origine.

2. Tools and materials required:

Spot welder;

New battery;

QIANLI Battery Data Copy Programmer;

QIANLI Connection Flex Cable;

Note: if the old battery is a replacement battery (not Origine), the solution will not work.

⚠️ Lithium-ion battery — for qualified professionals only
  • Before fitting: never install a battery that is swollen, punctured, deformed or without legible labelling.
  • Diagnose the device first: no new battery on a short-circuited, corroded or unrepaired board.
  • Exact reference only — a neighbouring model, even if it fits, is improper use.
  • After fitting: full supervised charge cycle and temperature check.
  • Swollen battery: do not ship it (ADR class 9 dangerous goods) — open an RMA with photographs.
  • Consumable: capacity loss through use and ageing is not a defect.
Full installation rules and liability regime — Schedule 3 of the GTCS
Description

Note:

-Software download: www.qianlispace.com

-To delete the battery data, connect the device to 'Qianli Repair Helper' on the PC.

Before the data is corrected, do not connect to i4 or Shalou to avoid data being saved and not being green.

Data sheet
Qianli
O0236
6903
6971064236138